Factory Wholesale Heat Shrink Tube Identification Marker Sleeve Cable Marking Sleeve

Product Description

MS-VLA MS-VLA(C)

Product Description

Description
MSVLA, VW-1 Heat Shrink Cable Identification Tube, is the AMS grade cable and wire identification sleeves, which is made of cross-linked environmentally friendly polyolefin bombarded by high-power electron beam with electronic accelerators to meet requirements of high end markets where highly reliable cable& wire identification is required. It accords to Classes 1 and 3 of AMS-DTL-23053/5 half-hard high molecular materials. For this product, both 2:1 and 3:1 shrink ratio are available on your request.

 

Detailed Photos

 

 

Product Parameters

Features
• AMS grade, lightweight, well suited for aerospace vehicles, tank, and submarines identification purposes
• High temperature resistant(temperature rating 135°C/275°F)
• Highly flame retardant, VW-1
• RoHS compliant
• Highly reliable and permanent identification
• Thermo-sensitive, quick recovery
• Computer-printable, any characters and logo are easy to design



Rated Temperature
• Continuous operating temperature: -55°C~135°C/-67°F~275°F
• Min. shrink temperature: 85°C/185°F
• Full recovery temperature: 115°C~200°C/239°F~392°F, 8~3minutes
• Max. storage and transportation temperature: ≤+50°C/122°F



Standards
• Meets AMS-DTL-23053/5, compatibility: UL224
• Color code soundness: SAE-AS 81531 and MIL-STD-202F/215J



Technical Data

Performance			Indicators	Test Method
Typical properties	Unit	States
Tensile Strength	Mpa	Unaged	≥10.3	ASTM G 154,MIL-DTL-23053E ISO 37,500mm/min 175°C,168h,ISO 188
		Heat aged/ After fluids/UV aged	≥6.9
Elongation at break	%	Unaged	≥200
		Heat aged/ After fluid	≥100
Secant Modulus	Mpa	Unaged	<173	ASTM D 882
Voltage Withstand	V	Unaged / After aged	2500V, No breakdown in 60 sec.	IEC 243,ASTM G 154 175°C,168h,ISO 188
Dielectric Strength	MV/m	Before aged	≥19.7
		Heat aged/ After fluid/ UV aged	≥15.8
Volume Resistivity	Ω.cm	Unaged	≥1014	IEC 93
Dielectric constant	-	Unaged	≤3.1	ASTM 150
Water Absorption	-	Unaged	≤0.5%	ASTM 570,23°C,24h
Bare Copper Corrosion	-	Unaged	No corrosion	23°C,Rh 95±5%,24h 175°C,16h
Heat Shock	-	Unaged	No cracks, flowing, dripping	Wind to the specified mandrel,225°C,4h
Cold Flexibility	-	Unaged	No cracks	Wind to the specified mandrel,-55°C,1h
Flammability	-	Unaged	VW-1	IEC 60332-1-3 Ed.1.0 b:2004
Longitudinal Change	%	Unaged	2X:-10~+1	200°C,Constant 3min
			3X:-15~+5
Smoke Density	-	Unaged	-	DIN 5510-2
Toxcity Index	-	Unaged	-	BS 6853:1999

Dimensions
Shrink ratio(2:1)

Order Description	Expanded As Supplied(mm)			Recovered After Heating(mm)
	Inner Diameter ID1	Flatten width G	Dual Wall Thickness H	Inner DiameterID2	Single Wall Thickness h
MSVLA-2X-1.6/	2.00±0.20	3.7±0.3	0.48±0.10	≤0.79	0.45±0.06
MSVLA-2X-2.4/	2.79±0.20	5.0±0.3	0.48±0.10	≤1.18	0.49±0.06
MSVLA-2X-3.2/	3.64±0.23	6.3±0.4	0.48±0.10	≤1.59	0.51±0.06
MSVLA-2X-4.8/	5.26±0.25	8.9±0.4	0.49±0.10	≤2.36	0.54±0.06
MSVLA-2X-6.4/	6.92±0.28	11.5±0.4	0.50±0.10	≤3.18	0.56±0.06
MSVLA-2X-9.5/	10.2±0.32	16.7±0.5	0.51±0.11	≤4.75	0.59±0.06
MSVLA-2X-12.7/	13.5±0.36	21.8±0.6	0.52±0.11	≤6.35	0.60±0.07
MSVLA-2X-19/	20.1±0.40	32.2±0.6	0.53±0.11	≤9.53	0.62±0.07
MSVLA-2X-25/	26.7±0.45	42.5±0.7	0.55±0.12	≤12.7	0.63±0.07
MSVLA-2X-38/	39.8±0.51	63.2±0.8	0.57±0.12	≤19.1	0.64±0.07
MSVLA-2X-51/	53.0±0.56	83.9±0.9	0.58±0.13	≤25.4	0.64±0.08
MSVLA-2X-76/	79.4±0.56	125.3±1.0	0.59±0.13	≤38.1	0.64±0.09

Shrink Ratio(3:1)

Order Description	Expanded As Supplied(mm)			Recovered After Heating(mm)
	Internal Diameter ID1	Flatten Width G	Dual Wall Thickness H	Inner Diameter ID2	Single Wall Thickness
MSVLA-3X-1.6/	2.00±0.20	3.7±0.3	0.47±0.10	≤0.53	0.52±0.06
MSVLA-3X-2.4/	2.79±0.20	5.0±0.3	0.47±0.10	≤0.79	0.57±0.06
MSVLA-3X-3.2/	3.64±0.23	6.3±0.4	0.48±0.10	≤1.06	0.61±0.06
MSVLA-3X-4.8/	5.26±0.25	8.9±0.4	0.49±0.10	≤1.59	0.67±0.06
MSVLA-3X-6.4/	6.92±0.28	11.5±0.4	0.50±0.10	≤2.36	0.71±0.06
MSVLA-3X-9.5/	10.2±0.32	16.7±0.5	0.52±0.11	≤3.18	0.77±0.06
MSVLA-3X-12.7/	13.5±0.36	21.8±0.6	0.53±0.11	≤4.75	0.80±0.07
MSVLA-3X-19/	20.1±0.40	32.2±0.6	0.55±0.11	≤6.35	0.84±0.07
MSVLA-3X-25/	26.7±0.45	42.5±0.7	0.56±0.12	≤8.47	0.86±0.07
MSVLA-3X-38/	39.8±0.51	63.2±0.8	0.57±0.12	≤12.9	0.89±0.07
MSVLA-3X-51/	53.0±0.56	83.9±0.9	0.57±0.13	≤17.2	0.90±0.08
MSVLA-3X-76/	79.4±0.56	125.3±1.0	0.59±0.13	≤25.8	0.92±0.09

Standard Package Data

No.	Sizes	Packaging(Pcs/Reel)
		Box 210	Box 146
1	Φ1.6	2500	250
2	Φ2.4	2500	250
3	Φ3.2	2000	250
4	Φ4.8	2000	250
5	Φ6.4	1500	250
6	Φ9.5	1000	250
7	Φ12.7	500	250
8	Φ19	500	250
9	Φ25	500	250
10	Φ38	250	250
11	Φ51	250	250
12	Φ76	250	250

 

Company Profile

Suzhou Volsun Electronics Technology Co.,Ltd. was founded in 2006. We keep focusing on the R&D, production and sales in insulation, sealing & protection solutions for over 17 years.

Quality is our culture. Volsun has a modern quality management system, which has passed a series of quality system certification such as IATF16949, ISO9001 etc. And we have gained some advanced titles such as Jiangsu famous scientific and technical corporation, China new high-tech enterprise etc. have independent intellectual property rights, 88 patents and 97 product certifications.

Up to now, Volsun cooperated with customers from 88 countries, we offer suitable sealing, waterproof solutions for some well-know enterprises in communication,Automobile, Power industry etc.

Certifications

    

 

 

Packaging & Shipping

 

Trade terms	FOB, EXW, CIF, DDU, DDP, CFR
Payment terms	T/T, L/C, Negotiable
MOQ	1,000PCS
Supply capability	100,000 rolls per month
Lead time	usually 3-7 working days
Shipment	Express, Air, Sea
Port	Shanghai, Ningbo, Shenzhen
Sample availability	Yes
Sample time	usually 1-2 days
Packaging	Normal: Plastic bag & Carton & Pallet Special: Customized packing