Cold Shrink EPDM Tubes Connector Insulators RUBLS-EPDM Seriesl DescriptionVOSLUN RUBLS-EPDM a series of open-ended, tubular rubber sleeves, which are factory expanded and assembled onto a removable core. They are supplied for field installation in this pre-stretched condition. The core is removed after the tube has been positioned for installation over an in line connection, terminal lug, etc., allowing the tube to shrink and form a waterproof seal. The insulating tube is made of EPDM rubber, which contains no chlorides or sulphurs. Various diameter sizes will cover a range of 1000 volt cables, copper and aluminium conductors. Unique Advantages Excellent weather resistance, ultraviolet aging resistance and higher embrittlement resistance than heat shrink tubing More resistant to slab and prick, abrasion, acid and alkali than silicone cold shrink tubingSimultaneously expands and shrinks with workpieces without clearances, seals tight in harsh environmentStably sealing the workpieces in windy environmentWell suited for cable less than 1KVSeals tight, retains its resiliency and pressure even after prolonged years of ageing and exposure.Simple , safe installation, requires no tools or special training. No torches or heat work required.Diameter shrinkage:≥50%Sealing class IP67, IP68 Applications Primary electrical insulation for all solid dielectric (rubber and plastic) insulated wire and cable splices rated to 1000voltsMeets ANSI C119.1, directly buriable or submersibleFor indoor, outdoor, or overhead use Physical protection and moisture sealing for high-voltage, air-insulated connectors and lugs such as spacer cable and lug connections to bus barInsulation of secondary splices copper or aluminium conductors Relocation of service Dig-in repairs, sheath repairsInsulation of inline conductor transition connectors
Apart from EPDM rubber cold shrink tube, Silicone cold shrink tubes
are also available from us!